DIY Laptop Stand
Give your workstation a special touch with a PVC Laptop Stand for desks.
Our super easy DIY laptop stand is made out of only 11 pcs. of PVC and is very easy to assemble. You can use it for work from your home space, or on your school desk, or take it to your favorite coworking space. A perfect PVC project for new DIYers.
This PVC laptop stand is 13” wide but you can adjust it according to your needs, we also recommend to give it a perfect finish with your favorite plastic spray paint.
Ideal for: Any size of laptop since you can adjust the width of the design.
Ready to start this new PVC project that will bring joy to your pocket? Let’s do it!
Instructions
A note before starting -
Please understand - the below diagrams are genuinely and carefully designed to help you navigate the build process. However, we don’t include specific recommendations for which tools, hardware, or products to use. These truly are “DIY” designs.
As such – a significant portion of the build-process will be up to you, the builder. So please know, there is no “right” or “wrong” way to assemble any of our designs! If you need to depart from the instructions, or rearrange things along the way, feel free to.
The only thing we ask: please be safe! And of course, there’s no shame in asking an expert for help or seeking guidance from your local professionals at any time.
And please: enjoy the process!
Laptop Stand Assembly Steps
Step 1: Cutting the PVC Parts and Assembling the Laptop Stand
Our first step will be measuring all of your 1/2 " PVC tubes. Remember that you must be very precise so that every piece falls into the right place and avoid assembling an unbalanced stand.
The stand is made out of a 2 1/2 " tube with a width of 10" and a 1/2 " tube with a width of 13". This is basically the width and depth of your laptop's stand. You'll need two 1/2 " tubes for the height of the cut at 3" long.
And, finally, you'll need the 6 1/2 " elbows that will connect all your PVC tubes.
Guide yourself through the diagram above.
Start with a 1/2 " elbow and connect it to a 1/2 " PVC tube with a length of 10", then add a 1/2 " elbow facing down.
You will then connect to a 1/2 " PVC tube with a length of 3" and then again to a 1/2 " elbow.
Next add the 1/2 " PVC tube with a length of 13" and connect it to an 1/2 " elbow facing up.
Then connect it to your 1/2 " PVC tube with a length of 3", another 1/2 " elbow and then again the 1/2 " PVC tube with a length of 10" and finish the stand with your last 1/2 " elbow.
It's that simple! Did you enjoy the process?
Tag us on TikTok to see the finish you added to your smart and simple laptop stand!
A Minimalist Aluminum Desk for Your Laptop Stand
If you liked your DIY experience here we have your next aluminum project. Build your next 8020 aluminum desk with a very clean and minimalist design. Find the 3D modeling, list of parts and step-by-step guide to this aluminum desk. Enjoy the process!
Laptop Stand Parts List
4 parts
1/2" Tube - 13" Length
PVC - Standard PVC
- Quantity
- 1
1/2" Tube - 3" Length
PVC - Standard PVC
- Quantity
- 2
1/2" Tube - 10" Length
PVC - Standard PVC
- Quantity
- 2
1/2" 90° Elbow Slip PVC
PVC - Standard PVC
- Quantity
- 6
Ready to make it yours?
Copy this design and change it in Crafti, in your browser.