Wood and Steel Plant Shelf Plans

DIY Plant Shelf with Steel

Green plants are never enough, so here is a must build plant shelf with steel!

If your home is getting a bit hot, then maybe more plants could be the answer. We understand that you may not have space for more pots, so what if you decorate your walls with this amazing shelf? This is a DIY plant shelf with a step-by-step guide that will show you how to build this woodworking project. It's very easy, it takes some time measuring and cutting tubes, but the results are so worth it! This wooden shelf can support six plants, depending on their size.

This wooden shelf is 24" wide and 30" high, but you can adjust it according to your needs by editing the free 3D design. We also recommend giving it a perfect finish with varnish.

Ideal for: Living rooms, kitchens, bathrooms

Let’s start with this new woodworking project! Ready?

Instructions

A note before starting -

Please understand - the below diagrams are genuinely and carefully designed to help you navigate the build process. However, we don’t include specific recommendations for which tools, hardware, or products to use. These truly are “DIY” designs.

As such – a significant portion of the build-process will be up to you, the builder. So please know, there is no “right” or “wrong” way to assemble any of our designs! If you need to depart from the instructions, or rearrange things along the way, feel free to.

The only thing we ask: please be safe and use glasses and gloves while building. And of course, there’s no shame in asking an expert for help or seeking guidance from your local professionals at any time.

And please: enjoy the process!

Wood and steel plant shelf 3D render, second view

Wood and steel plant shelf 3D render, third view

Plant Shel with Steel Assembly Steps

Step 1: Building the Wooden Shelves

You'll grab your 1x3" lumber for each shelf, one 1x3" long, three 1x3" where each part should be 24" long and two 1x3" cut at 9.5" long.

First grab your 1x3" and 9.6" long and affix them to the 22" lumber. Assemble them in a basic butt joint. You can add glue around the edges for extra support. Use 1 1/2” nails to put the parts together.

Once you have this part ready, bring your three 24" long lumber and place them evenly on the top of the piece you assembled. You’ll do this same step on your other two shelves.

We recommend that you sand and varnish each shelf for a better finish. This should have dried by the time you finish the next step.

Make sure to use your protective gear during the process.
‍

‍

Step 2: Steel Structure Assembly

We will now move on to the steel structure, for this step we will need three 1/2 " tee steel, five 1/2 x 2" Nipple Steel, five 1/2 " flange steel, two 1/2 x 11" nipple steel, four 1/2 x 4" nipple steel, and two 1/2 " elbow steel.

Grab your 1/2 x 11" Nipple Steel and place on each end a 1/2 " tee steel , then add the second nipple steel and add the last nipple steel.

Then screw the 2" nipple steel to the tee steel, then add to the steel the flange steel.

Now grab your 1/2 x 4" nipple steels and screw them into the tee steel and add on each end a 1/2 " elbow steel and again a 1/2 x 4" nipple steel. You'll do this on each end. Finally, add the flange steel. You'll do this step twice.

‍

Step 3: Putting Together the Shelves and Steel

Now, we will affix the steel structure onto the wooden shelves. Mark centered on each side of the wooden shelf where you will screw the flange steel; drill carefully. Use 3/4 " screws.

Once you've affixed all the shelves, you'll now use the 3/4 " screws to place it on the wall.

How did you feel about this project?

This is how my Plant Shelf with Steel looks like :

‍

Wood and steel plant shelf assembly diagram, step 3

‍

A Beautiful Plant Stand for Your House

Are you ready for your next DIY experience? This woodworking project will save you space in your garden or even indoors. Build a plant stand for your small pot. Find the 3D modeling, list of parts and step-by-step guide to this Plant Stand here. Enjoy the process!

‍