Connection Types Wiki · Pipe threads

Female NPSM Washer-Sealed Swivel

A free-spinning female threaded swivel nut with internal parallel straight pipe threads (typically NPSM) and a captive elastomeric face gasket/washer, designed to thread onto male pipe threads (MIP/NPT) and seal axially against the male rim rather than on the thread flanks.

Illustration of a Female NPSM Washer-Sealed Swivel
Stands for
FIP = Female Iron Pipe; MIP = Male Iron Pipe; NPSM = National Pipe Straight Mechanical.
Gender
female
Connects by
threaded, compression
Standards
ASME A112.18.6 (flexible water connectors); CSA B125.6; ASME B1.20.1 (NPSM thread form); ASME B1.20.7; SAE J514; ASME A112.18.1
Regions
North America, worldwide

How it connects

Straight internal threads draw the captive flat rubber/EPDM/cone washer firmly against the flat face or rim of the mating male fitting (MIP/NPT or NPSM), compressing the washer to achieve a watertight seal without thread sealant.

Male and female halves

Female swivel nut containing a captive sealing washer, mating with a rigid male external pipe thread (MIP/NPT or male straight shank).

Usually connects to

Common sizes

  • Washer-sealed swivels commonly 1/2-14 NPSM: nominal 1/2 in pipe size, about 0.840 in (21.3 mm) major diameter, 14 TPI.
  • Other riser/appliance versions include 3/8 and 3/4 in. Hose nuts may be sold as 15/16 in connection size; the broader NPSM family includes 1/8-27–2-11.5.

Where it is used

Residential/commercial plumbingFaucet/toilet suppliesWater-heater connectorsHandshowers/slide-bar kitsHydraulic/fluid-power adaptersIndustrial piping

Variations

  • Nickel-plated brass hex hose nut
  • CPVC/plastic knurled/winged hand nut
  • Stainless crimped swivel collar
  • Conical hose swivel
  • Screen/flow-restrictor washer
  • Straight union or 45°/90° elbow swivel

How to recognise it

Recognised as an internal hex or winged captive swivel nut at the end of a flexible braided or corrugated riser hose, with internal parallel threads and a visible flat black or white rubber washer seated at the inner base.

Often confused with

Confused withHow to tell them apart
NPT pipe threadStandard NPT/FPT has internal tapered threads that seal via thread interference/engagement using Teflon tape or pipe dope, whereas FIP supply swivel uses parallel straight threads and a captive rubber washer face seal. NPT is tapered and seals on the threads with tape/sealant; NPSM is straight and seals with a washer. Male NPT shower arms will accept an NPSM hose nut. 1/2" NPT is a fixed tapered internal thread that seals by thread interference using PTFE tape or paste; this swivel has free-spinning straight (NPSM) threads that seal on a recessed rubber washer without thread sealant.
Compression Female Swivel (e.g. 3/8" Comp)Compression fittings use UNF threads and seat on an internal brass or plastic bevel/cone without pipe thread compatibility; 1/2" FIP swivel is larger and threads directly onto standard 1/2" pipe fittings.
G1/2 (1/2" BSPP) shower hose nutEuropean/international hoses use G1/2: 14 TPI too but 55° Whitworth form and slightly larger diameter (20.955 vs 21.3 mm basis); they feel loose or cross-thread on NPSM. Check market/listing for 'G1/2' or 'BSP'.
1/2" BSPP (G 1/2) flat face swivelBSPP has a 55-degree thread profile and 14 TPI with slightly different pitch diameter (~20.95 mm) and will not properly mate with North American 60-degree NPSM/NPT male threads.

Also called

1/2" FIP faucet connector; 1/2" faucet swivel connectorFIP supply line nutfemale straight pipe swivel nutwasher-sealed FIP swivel1/2" IPS shower hose nut; 1/2" IPS faucet supply nut; 1/2-14 NPS shower connectionstandard US shower hose thread1/2" NPSM female swivel nut; 1/2" NPSM swivel union; 1/2" NPT female swivel-08 NPSM swivel

Good to know

Although labeled 'FIP' (Female Iron Pipe) in retail plumbing contexts, the internal threads are straight mechanical (NPSM) rather than tapered (NPT) so that the nut can rotate freely and compress the washer against an MIP end without thread binding. Additional standard references: CSA B125.1.

Related connections

Design with real parts

Crafti checks which parts connect, right in your browser.

Start a Project

Crafti Free

Everything you need to start designing.

Parts

  • 22,100+ real parts in 346 categories
  • Configurable parts
  • Real-world textures

Build

  • Snap-to-connect
  • See what connects to what
  • Auto-adjust by joints
  • Build once, repeat many
  • Draw & cut shapes

Precision

  • Easy 3D positioning
  • Make it flush
  • Point & click measuring
  • Scale references

Plan & buy

  • Live parts list
  • Cut plan for stock lengths
  • Fill your cart at retailers

Workspace

  • Works in your browser and on your phone
  • Backdrop reference images
  • Save up to three designs
Start designing for free

Need more? See Crafti Pro