How it connects
Hand-tightened (no tools) by screwing the female ACME nut onto the valve's external ACME thread; the gas seal is made by the nose of the inner probe against a rubber seal inside the valve outlet, not by the ACME thread.
Male and female halves
This is the female (internal ACME thread nut, with a central male probe/nipple); the cylinder valve has the male external ACME thread and also accepts a left-hand POL fitting internally.
Usually connects to
- Matching CGA 791/QCC1/Type 1 OPD cylinder outlet with right-hand external 1-5/16 in ACME thread, including 5–40 lb cylinders and common 20/30/40 lb tanks
- Matching QCC1 male adapter or POL-to-QCC1 adapter
Common sizes
- One 1-5/16-5 ACME size, 1.3125 in (about 33.3 mm) major diameter, with a handwheel nut for portable LP vapor-withdrawal cylinders up to 40 lb.
- Hose/regulator connections are separate, commonly 1/4 in NPT or 3/8 in flare.
Where it is used
Grills/barbecuesOutdoor burners/turkey fryersRV/camping propane hookupsPatio heatersPortable LP appliancesResidential propane-cylinder connections
Variations
- Standard/medium/high-flow ACME nut, plastic handwheel or brass/metal
- Excess-flow/thermal-shutoff element
- Black: descriptions range up to about 100,000–200,000 BTU/hr
- Green: around 200,000 BTU/hr
- Red: roughly 400,000–500,000 BTU/hr; match the specified regulator flow
How to recognise it
Large knurled or hex-wing hand nut (often black or green plastic) about 1.5-2 in across, with a coarse internal trapezoidal thread and a brass probe protruding at the center; attached to a regulator or hose end feeding a grill or burner.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| POL (CGA 510) fitting | POL is a small left-hand-thread brass nipple that threads inside the valve outlet; the QCC1 nut is a large right-hand nut over the outside of the valve. CGA 510 POL has a left-hand male thread that screws inside the valve port using a wrench, whereas QCC1 has large external plastic handwheel nut with right-hand threads that screws onto the outside. POL is a left-hand thread inserted into the valve's inside; QCC1 is a large right-hand external ACME nut threaded over the outside of the valve. |
| Garden hose thread | Garden hose thread is a fine V thread (11.5 TPI) with a flat washer; ACME is a coarse trapezoidal thread about 1-5/16" with a center probe. |
| QCC2 (CGA 810) | QCC2 is a push-to-connect / quick-disconnect style coupling rather than a threaded Acme nut. |
| 1"-20 (CGA 600) 1 lb cylinder thread | CGA 600 is a small fine 1"-20 thread for disposable 1 lb bottles; QCC1 is a much larger coarse ACME thread. |
Also called
QCC1 acme nutType 1 propane connectorType I couplingQCC Type 1Type 1 Acme nutCGA 791 nutPropane Acme nutpropane tank hand-wheel nut
Good to know
Type I and QCC1 name the same coupling. Additional standard references: CSA 6.25.
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.

