How it connects
The cut or extruded outer edge/end profile of the hollow-core PVC slatwall panel slides directly into the U-channel or J-pocket of perimeter trim pieces, concealing cut edges and securing panel borders.
Male and female halves
Male panel edge to female trim channel: the solid/ribbed hollow profile end of the slatwall panel acts as the male insert that seats inside the female receiving channel of the J/L/H-trim.
Usually connects to
- Proslat J-trim channel
- Proslat L-trim channel
- Proslat H-trim channel
Common sizes
- Designed to fit standard Proslat PVC slatwall panel edge thickness (approx. 0.6 to 0.75 in / 15 to 19 mm depth) across panel lengths up to 8 ft (96 in / 244 cm).
Where it is used
garage wall organizationworkshop storagecommercial retail display
Variations
- Proslat Classic PVC panel edge
- Proslat PROCORE PVC panel edge
How to recognise it
Recognized as the transverse cut edge or flat perimeter end of an extruded multi-chamber cellular PVC panel, dimensioned to slip into perimeter J-trim and L-trim perimeter extrusions.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Proslat tongue-and-groove horizontal slat interlocking joint | The interlocking joint connects slats vertically top-to-bottom via a hidden screw channel and hook tongue, whereas the edge trim interface is the perpendicular end/perimeter inserting into trim channels. |
| Standard universal slatwall T-channel / T-slot | Universal T-channels hold accessory hooks and shelves along the horizontal face, whereas edge trim interfaces receive trim capping on perimeter edges. |
Also called
Proslat panel edgeProslat slatwall trim receiver interfaceProslat panel end
Good to know
Covers the interface where cut or full-length Proslat slatwall panels insert into perimeter finishing trim (starter J-trim, vertical side J-trims, top L-trim, or middle joining H-trims).
Design with real parts
Crafti checks which parts connect, right in your browser.