How it connects
Linear sliding engagement where a matching rectangular or T-profile miter bar slides smoothly along the channel with low lateral tolerance.
Male and female halves
Female channel/track receiving a male sliding miter bar or runner.
Usually connects to
- standard 3/4" x 3/8" miter bar
- miter gauge runner
- T-slot miter bar guide washer/disc
Common sizes
- Industry standard nominal 3/4" wide by 3/8" deep (approx. 19.05 mm wide slot, often with a bottom T-slot undercut expanding to ~23.4 mm / ~15/16"). External extrusion width commonly ~1-1/8" (28.6 mm) to 1-1/4".
Where it is used
woodworking machinerytable sawsrouter tablesband sawsdrill press tablesworkbench jig fixtures
Variations
- Plain rectangular slot (no T-undercut)
- T-slot miter track (with undercut to retain T-bars and washers)
- Combination miter and mini T-track extrusion
How to recognise it
Recognizable as an anodized aluminum channel or cast iron table groove measuring roughly 3/4" wide at the opening and 3/8" deep, typically with stepped bottom shoulders forming a T-slot undercut to prevent miter bars from lifting.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Mini T-track / standard 1/4" T-track | Mini T-track is much narrower (top opening ~7/16" or 8.5-11 mm) designed for 1/4" or 5/16" T-bolts/hex bolt heads, whereas miter track has a 3/4" wide top opening for miter gauge bars. |
| 30mm / 45mm European miter track | European and metric guide tracks use different channel widths (such as 30mm or 45mm outer profile) rather than the standard North American 3/4" (19.05 mm) inner slot. |
Also called
miter slot trackmiter T-tracktable saw miter slot
Good to know
Commonly integrated into table saw tops or sold as aftermarket aluminum extrusions to route into custom workbenches and router tables.
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.



