How it connects
The rectangular head slides into the open end or drop-in notch of a T-track channel beneath retaining lips; the channel walls stop head rotation while a knob or nut tightens against the jig, clamping it in place by friction.
Male and female halves
Male captured head that slides into the female captive slot of an extruded T-track.
Usually connects to
- Matching aluminum T-slot/T-track, including universal or miter-track profiles
- Matching machine-tool T-slot table
- Matching threaded clamping knob or hex nut
Common sizes
- Typical woodworking studs use 1/4-20, 5/16-18, 3/8-16 or M5/M6/M8. Heads often span 7/16–3/4 in long, 3/8–9/16 in wide and about 1/8 in thick.
- Examples: 17/32 × 3/4 × 7/64 in (about 13–14 × 19 × 2.8 mm), 16 × 10–12 × 3 mm, or 10 mm AF with a 6 mm shank and 3 mm flange.
- Broader T-slot hardware spans 6–36 mm (1/4–1-1/2 in) slots, M5–M36 or 1/4-20–1-8 threads; confirm that it fits the woodworking track.
Where it is used
woodworking jigs and fixtures; woodworking jigs and T-tracksdrill press tables; router tablesworkbench workholdingkayak gear tracksvehicle roof rack accessory tracksmachine tool workholding and clamping tablesmodular aluminum extrusion framing (80/20, Bosch Rexroth)solar panel mounting rails
Variations
- Universal rounded-rectangle woodworking T-bolt
- End-sliding rectangular T-bolt
- Drop-in/twist-in stud or quarter-turn hammer head
- DIN 787/ASME B5.1M heavy machine-table bolt
- Sliding hex-head bolt for suitable 1/4 in tracks
- Molded plastic keyed runner/slide bar
How to recognise it
Recognised by a flattened, elongated rectangular head (often with radiused ends) formed directly at the base of an externally threaded machine bolt stud, designed to fit into 3/4" x 3/8" external dimension extruded T-tracks.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Machine table T-slot bolt (DIN 787) | Machine table T-slot bolts have thick, square or heavy rectangular forged heads designed for heavy metalworking milling tables, whereas woodworking T-track bolts have thin stamped/forged rounded-rectangular heads (~7/64" / ~3 mm thick). |
| Standard hex head bolt | Hex bolts have a hexagonal 6-sided head; some universal tracks accept 1/4"-20 hex heads, but dedicated T-track bolts have an elongated rectangular head with rounded ends. Hex bolt heads have six hexagonal flats and can spin inside oversized T-tracks, whereas T-bolts have flat rectangular or hammer-shaped flanges designed to resist rotation. |
| T-slot drop-in nut (roll-in nut) | A drop-in nut has internal female threads and rotates 90 degrees to lock into structural aluminum extrusion (e.g. 80/20), whereas a T-track bolt is a male threaded stud with an integrated captured head. A T-slot nut has female internal threads residing inside the track rather than a fixed protruding threaded male stud. A T-nut is an internally threaded female block that slides into a T-slot, whereas a T-bolt has an integrated male threaded stud protruding from the head. |
Also called
T-track boltjig bolthammer head boltdrop-in sliding bolt; drop-in T-boltTee-head boltBORA WTX track bolt; BORA NGX track clamp boltBORA clamp edge accessory guide boltMiter T-slot bolt head
Good to know
Woodworking T-track bolts generally fit universal 3/4" aluminum tracks. The head prevents rotation inside the track so accessories can be clamped or released using a top knob. Additional standard references: Standard 3/4" x 3/8" table saw miter slot convention.
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.


