Connection Types Wiki · Hose & tube fittings

Worm-Drive Hose Clamp

A worm-drive (worm-gear) hose clamp: a slotted stainless band wrapped around the outside of a hose or flexible duct slipped over a spigot, tightened by a captive screw so it squeezes the hose onto the spigot. The clamp grips a plain round OD; it has no mating counterpart of its own.

Illustration of a Worm-Drive Hose Clamp
Stands for
Worm drive = the captive screw (worm) engages slots or ridges in the band (like a worm gear) to tighten or loosen it.
Gender
female
Connects by
clamp, compression
Standards
SAE J1508 (hose clamps; compliance depends on the product); DIN 3017 (German/European worm-drive clamps); EN ISO 3017
Regions
worldwide, North America, UK

How it connects

The band goes around the hose/duct OD over a spigot; turning the screw (slotted hex head, 5/16" or 7 mm hex is common) pulls the band tight, compressing the hose onto the spigot to hold it and seal it by friction and compression.

Male and female halves

There are no real genders. Calling it 'female' only means it surrounds a round OD (the hose over its spigot). It's one-sided: the clamp grips the outer diameter and does not mate with another connector.

Usually connects to

  • Exterior of matching-OD flexible hose or round duct over a plain/barbed spigot, tube, pipe stub or rigid duct collar
  • Poly pipe over a compatible insert fitting

Common sizes

  • Select by adjustable clamping range for installed hose OD. SAE sizes run from about #4 through #104 and beyond, with ranges reaching #300/#390 and about 1/4–25+ in.
  • Examples include 8–12, 27–51, 40–60, 72–95 and 190–203 mm (8 in) ranges, plus 11/16–1-1/4 in (17.4625–31.75 mm). Duct clamps commonly span 3–12 in.
  • Bands are typically 8–14 mm wide: 8–9 mm (5/16 in), DIN 9/12 mm, or a reported 1/2 in (12.7 mm) estimate.

Where it is used

Automotive coolant/fuel/intake hosesHVAC, dryer and dust-collection ductsPlumbing/drainage/irrigation, including poly pipeMarine hosesIndustrial fluid hoses and fitting retention

Variations

  • US/SAE perforated band
  • German DIN 3017 embossed/nonperforated band, including formed-groove/Jubilee descriptions
  • Swedish style
  • Lined/high-torque
  • Plastic worm-drive
  • Mini clamp
  • Different band widths and diameter ranges

How to recognise it

A thin metal band with a row of slots (perforated) or pressed ridges, and a small housing holding a hex/slotted screw lying along the band. It sits around the end of a hose or flex duct.

Often confused with

Confused withHow to tell them apart
T-bolt clampA T-bolt clamp is a solid band tightened by a bolt and nut across a bridge. It has no slotted band or worm housing.
Ear (Oetiker) / spring clampThese have no screw. They're tightened by crimping a raised ear or by spring tension.
Gear clamp for duct vs. duct band/strap tieA nylon duct strap uses a ratchet tie, not a screw housing.
Female threaded hose couplingA female coupling has internal helical mating threads. This clamp presents a band around the hose OD; its screw is an actuator, not the hose mating interface.
Spring or ear hose clampWorm-drive clamps have a captive screw housing and adjustable band; spring clamps use spring force, while ear clamps are tightened by deforming an ear.

Also called

Jubilee clip (UK)worm-drive hose clampworm-gear hose clampworm-drive hose clipscrew-band hose clampGerman style / Swedish style clampworm gear duct clamp

Good to know

The worm-drive clamp retains a plain-OD hose or duct slip joint. Size it to the outside diameter; a listed 203.2 mm maximum and a pictured 215.9 mm maximum are conflicting product information.

Related connections

Design with real parts

Crafti checks which parts connect, right in your browser.

Start a Project

Crafti Free

Everything you need to start designing.

Parts

  • 22,100+ real parts in 346 categories
  • Configurable parts
  • Real-world textures

Build

  • Snap-to-connect
  • See what connects to what
  • Auto-adjust by joints
  • Build once, repeat many
  • Draw & cut shapes

Precision

  • Easy 3D positioning
  • Make it flush
  • Point & click measuring
  • Scale references

Plan & buy

  • Live parts list
  • Cut plan for stock lengths
  • Fill your cart at retailers

Workspace

  • Works in your browser and on your phone
  • Backdrop reference images
  • Save up to three designs
Start designing for free

Need more? See Crafti Pro