How it connects
Hooks over the top edge of the horizontal rail profile and pivots downward until the lower spring-loaded locking gripper snaps securely around the bottom edge of the rail.
Male and female halves
Female mounting bracket that hooks onto and clamps around the male horizontal steel/composite wall rail.
Usually connects to
- Matching Rubbermaid FastTrack Garage horizontal rail/channel
- Matching FastTrack Wall Hook Adaptor
Common sizes
- For the FastTrack rail profile, described around 2–2.1 in (50–55 mm) high; bracket bodies about 50–65 mm wide.
Where it is used
garage storageworkshop organizationresidential storage systemsgarage organizationtool storageutility wall storage
Variations
- Standard accessory bracket with push/pull locking lever
- Direct wall/slatwall adaptor bracket
- Heavy-duty shelf bracket hanger
- Push-lever locking hook mount
- Slide-on hook adapter plate
- Non-locking friction / gravity hook bracket
How to recognise it
Recognizable by the stamped metal backplate with a 90-degree downward hooked upper flange and a central black composite/plastic locking gripper body emblazoned with the Rubbermaid logo.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Gladiator GearTrack/GearWall | Gladiator uses an upper tab that drops into a slat groove rather than an over-the-rail clamp with a spring locking gripper. Gladiator GearTrack uses a dual-slot horizontal cleat profile without the central locking push-cam lever characteristic of FastTrack. |
| Husky Track wall bracket | Husky and generic slatwall accessories insert into T-shaped horizontal channels rather than gripping an external rail profile. |
| DIN rail bracket | DIN rail clips attach to 35mm electrical DIN rails with a metal tension spring or latch, much smaller than garage utility rails. |
| French cleat | French cleats use matching 45-degree beveled strips held by gravity alone, whereas FastTrack uses a curved sheet-metal profile and a snap-locking bottom clamp. |
Also called
Rubbermaid FastTrack hook bracketFastTrack accessory bracketFastTrack rail mountRubbermaid FastTrack hook mountFastTrack rail clampFastTrack gripper
Good to know
FastTrack accessories can also be screwed directly to wall studs through pre-drilled holes in the backing plate when not used on a rail.
Design with real parts
Crafti checks which parts connect, right in your browser.