How it connects
Pipe end is pushed into the elastomer sleeve against a center stop; the band clamp is torqued (typically about 60 in-lb) to compress the rubber radially onto the pipe OD, sealing by elastomer compression. No threads, solvent or gasket groove.
Male and female halves
This is the female (sleeve/socket) side; it receives the male plain-end pipe or spigot. Mates by OD, so one sleeve can join different pipe materials of the same or similar OD.
Usually connects to
- Approved-OD/material plain pipe end: PVC/ABS DWV or IPS Schedule 40/80 PVC, ABS or steel
- Approved cast-iron soil-pipe hub/no-hub plain end
- Approved clay pipe or fitting spigot
Common sizes
- Select actual pipe OD and material. Fernco standard families span nominal 3/4–27 in; common DWV/sump ranges include 1-1/4–12 in, with larger 15+ in versions and reducing pairs such as 6 × 4 in.
- Nominal 4 in PVC DWV is 4.500 in (114.3 mm) OD. Fernco 1002-44 is nominal 4 × 4 in with a listed DWV-side OD range 4.00–4.63 in (102–118 mm).
- A nominal 3 in example is one size, not a universal coupling fit.
Where it is used
Residential/sanitary DWV and sewer lateralsDrainage repairs/material transitionsSump dischargeVibration isolation
Variations
- Equal-size straight or reducing/transition sleeve
- Stepped/reversible dual-size sleeve, such as 1-1/4–1-1/2 in
- Unshielded elastomer
- Shielded/shear-band type, including Proflex
- Cap/plug
How to recognise it
Black flexible PVC/rubber tube, often stepped for reducing sizes, with a stainless worm-drive hose clamp near each end; molded text usually reads 'ASTM C1173' and the pipe materials (e.g. '4" CLAY TO 4" C.I./PLASTIC').
Often confused with
| Confused with | How to tell them apart |
|---|---|
| No-hub cast iron coupling (CISPI 310 / ASTM C1277) | No-hub couplings have a neoprene gasket fully wrapped in a corrugated stainless steel shield with multiple clamps; C1173 Type A has exposed rubber with only the band clamps. |
| Solvent-weld DWV socket | Solvent sockets are rigid PVC/ABS hubs with no clamps; the C1173 sleeve is flexible rubber with worm clamps. |
| No-hub cast iron coupling (CISPI 310) | No-hub couplings feature an outer corrugated stainless steel shield and fit cast iron soil pipe ODs rather than unshielded rubber IPS sleeves. |
| Solvent weld PVC socket | Solvent weld sockets are rigid plastic requiring primer and cement; flexible clamp couplings use elastomeric rubber with external screw band clamps. A rigid solvent-weld socket bonds to pipe using cement; this flexible socket seals by an external clamp compressing the sleeve. |
| Shielded no-hub coupling | A shielded coupling adds a broad metal jacket around the sleeve to resist shear. The described unshielded sleeve has separate narrow end clamps. |
Also called
Flexible rubber/DWV couplingBanded rubber bootFlexible transition couplingUnshielded elastomeric sleeveFernco-type coupling endClamp-on pipe sleeve
Good to know
Shielded repair couplings are variants of the family. About 50 mm engagement is manufacturer-specific rather than universal.
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.

