How it connects
The male downspout tubing slips down into the female rectangular socket collar by gravity and friction; it is typically secured with sheet metal screws or zip screws, with no glue or gasket required.
Male and female halves
Female socket/collar receiving the male end of a rectangular downspout pipe.
Usually connects to
- Matching nominal 2 × 3 or 3 × 4 in rectangular plain/corrugated aluminum, steel or vinyl downspout, crimped or plain as specified
- Matching connector male spigot
- Matching A/B-style elbow male drop/crimped end
- Matching rectangular gutter drop/nozzle
Common sizes
- Common nominal rectangular sizes: 2 × 3 in (about 51 × 76 mm), 3 × 4 in (76 × 102 mm) and 4 × 5 in (102 × 127 mm).
- Some sockets are about 2.25 × 3.25 or 3.25 × 4.25 in internally; stepped universal versions may fit two profiles.
Where it is used
Residential/commercial gutters and downspoutsRoof runoff/stormwater drainageDownspout-to-drainpipe transitions
Variations
- 2 × 3 or 3 × 4 in socket
- Stepped dual-size socket
- Smooth or corrugated/fluted profile
- Vinyl or aluminum plain end
- Style A broad-face or Style B narrow-face elbow
How to recognise it
A rectangular female opening or box collar with rounded corners (often slightly corrugated or flared) that matches standard 2x3 or 3x4 downspout dimensions, designed to slip over downspout pipe ends without threads.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| PVC DWV / Sewer & Drain female hub | PVC/S&D female hubs are circular and require solvent cement sealing, whereas downspout sockets are rectangular and unglued. |
| HVAC rectangular duct slip collar | HVAC duct collars are sheet metal with drive cleat / S-slip edges for air ducting rather than gravity water drainage. |
| Crimped downspout male end | Crimped male ends have tapered flutes/indentations pressed into the corners/walls to reduce outside perimeter for inserting into another pipe, whereas plain slip ends have an unaltered profile. |
| Belled/expanded socket downspout end | Belled ends are formed with an enlarged collar to slip directly over an identical unmodified pipe end without an external connector. |
| Rectangular HVAC duct slip-and-drive | HVAC ducts use S-cleats and drive slips rather than telescoping crimped gravity water drainage joints. |
Also called
Downspout adapter socket; gutter downspout socket; Downspout adapter topDownspout receiverRectangular downspout sleeve; rectangular downspout female endDownspout collarplain downspout end; uncrimped downspout end; plain slip enduncrimped downspout receiving socketdownspout slip joint socketdownpipe bell end
Good to know
Commonly found on the top inlet of downspout adapters (e.g., ADS, NDS, Flex-A-Spout) converting rectangular gutter downspouts to round drain pipe (3 in, 4 in corrugated or PVC/S&D).
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.

