How it connects
Opposed T-bolts (closet bolts) anchored in the flange slots secure the toilet base downward, compressing a wax ring or elastomeric gasket between the flange rim and toilet horn to create a gas- and watertight seal.
Male and female halves
Female flange rim socket/face that receives the protruding male toilet horn (spigot) with a compressed sealing gasket in between.
Usually connects to
- Floor-mounted toilet outlet horn/base underside
- Matching closet-flange top face on 3 or 4 in drain
- Compatible wax ring or wax-free elastomer seal between the faces
Common sizes
- For nominal 3 and 4 in drain lines, often one seal fits both. Ring ODs are described around 4.5–6 in, including 5–5.5 in (125–140 mm), with openings about 3–3.5 in (75–88 mm).
- Closet flanges are commonly about 7 in OD, with 5.5–6 in bolt circles. One 4 in lead-bend example has estimated contact annulus 127 mm ID/140 mm OD, not a universal size.
- Standard and extra-thick seals serve different flange recess depths.
Where it is used
Residential/commercial floor-mounted toilet installationSanitary/DWV drainageUrinal installation
Variations
- PVC, ABS or cast-iron flange
- Stainless swivel-ring flange
- Hub, spigot or push-in-gasket fit
- Plain, extra-thick or plastic-horn wax ring
- Compatible wax-free rubber/foam seal
How to recognise it
A circular collar/ring sitting flush on the finished floor or subfloor, featuring a 3 or 4-inch central bore, floor-mounting screw holes around the perimeter, and two opposed curved circumferential slots designed to hold T-head closet bolts.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Pipe spigot / DWV hub connection | The closet flange face sits flush on top of the subfloor with radial bolt slots to bolt to the toilet, whereas the opposite end is a DWV solvent-weld hub or spigot joining the drain pipe. |
| Flange-to-drain-pipe connection | The target is the upper gasket-bearing face. The pipe attachment is a separate interface below or inside the flange. |
| Closet-bolt slots | Slots retain the mounting bolts; the annular area around the drain opening supports the seal. |
| Closet flange | The flange is a rigid plastic/metal ring fixed to the drain and floor with bolt slots; the wax ring is a soft deformable ring sitting on top of it. |
| Wax-free toilet seal (rubber/foam) | Wax-free seals are rubber or foam and spring back; wax is yellow-brown, sticky and stays deformed. |
Also called
water closet flangefloor flangetoilet flange rim; Toilet flange wax-ring seatCloset-flange sealing face; closet flange gasket seating facewax seal; wax gasketcloset ringtoilet bowl gasketwax ring with horn/funnel
Good to know
'Closet' means water closet or toilet. The top flange face mates with the toilet, while the bottom hub or spigot connects to the DWV waste pipe. Additional standard references: ASTM F1807; Federal Specification TT-P-1536A (plumbing fixture setting compound).
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.

