Connection Types Wiki · Plumbing fittings

Tubular Drain Slip-Joint Socket

The female end of a tubular (thin-wall) sink/lavatory drain slip joint: an externally threaded socket end that takes a plain tubular pipe, sealed by a tapered (beveled) washer squeezed by a slip-joint nut.

Illustration of a Tubular Drain Slip-Joint Socket
Stands for
Slip joint: the plain tube slides (slips) into the socket and can be adjusted in depth before the nut is tightened. Tubular = thin-wall drain tube sized by outside diameter.
Gender
female
Connects by
compression, threaded, insertion
Standards
ASME A112.18.2; CSA B125.2 (plumbing waste fittings); ASTM F409 (thermoplastic tubular drain pipe and fittings); Uniform Plumbing Code (UPC); International Plumbing Code (IPC)
Regions
North America, worldwide (metric equivalents)

How it connects

Slip nut and beveled washer slide onto the plain tube; tube inserts into the threaded socket; tightening the nut (hand-tight) compresses the washer's taper into the socket mouth, sealing around the tube OD. Non-pressure, gravity drain only.

Male and female halves

This is the female (socket) side: the threaded flared end that receives the tube and carries the nut. The male side is the plain tubular pipe end (tailpiece/trap arm), not threaded.

Usually connects to

Common sizes

  • Tubular sizes are actual tube OD: 1-1/4 in (31.75–31.8 mm) for lavatories and 1-1/2 in (38.1 mm) for kitchen/tub drains.
  • A 1-1/2 × 1-1/4 in reducing washer adapts the smaller tube. Retaining threads are coarse mechanical threads, not NPT.

Where it is used

Residential/commercial under-sink drainageSink/lavatory tailpiece extensionsP-/bottle trapsTub waste/overflow assemblies

Variations

  • PP/PVC, brass or die-cast slip socket
  • Plastic or chrome-brass/zinc nut
  • Flat, beveled or flanged washer
  • 1-1/2 × 1-1/4 in reducing washer
  • Flanged-tailpiece/ground joint
  • Captured or loose nut

How to recognise it

Short flared socket with coarse external threads at the end of a trap, tee or tailpiece, with a large ribbed/knurled (plastic) or smooth (metal) nut and a rubber or plastic beveled washer inside; a plain smooth tube enters the nut.

Often confused with

Confused withHow to tell them apart
DWV solvent-weld socket (ABS/PVC hub)Solvent socket has no external thread or nut and fits Schedule 40 pipe OD (1-1/2 in. pipe is 1.900 in. OD, not 1.5 in.).
NPT or NPSM threaded drain outletSlip joint thread is on the outside of the socket, straight and coarse, and sealing is by washer, not thread taper. A slip joint's thread only holds the nut; the tube itself is plain and sealed by the washer.
Flat washer ground joint (flanged tailpiece)That uses a flared tube end on a flat washer rather than a beveled washer around a plain tube.
Solvent-weld DWV socket (Schedule 40 PVC/ABS hub)DWV sockets are smooth, unthreaded, sized by nominal pipe size and glued; slip joints have an external thread and nut/washer.
1-1/2 in Schedule 40 PVC socketTubular slip-joint measures exactly 1.50 in (38.1 mm) OD, whereas 1-1/2 in Schedule 40 pipe has an OD of 1.90 in (48.3 mm) and requires solvent cementing.

Also called

Tubular drain slip joint/socket/hubSlip-nut/compression-drain jointFemale slip joint (FSJ)Slip-fit inlet/extension socket1-1/2 in tubular slip jointUnder-sink slip-joint connector

Good to know

The standards listed are my best knowledge, not checked against a source here; verify before relying on them. The thread form is not well standardized across makers, so nuts are usually treated as brand-compatible by size only. On the sample part the other end is an ABS DWV socket.

Related connections

Design with real parts

Crafti checks which parts connect, right in your browser.

Start a Project

Crafti Free

Everything you need to start designing.

Parts

  • 22,100+ real parts in 346 categories
  • Configurable parts
  • Real-world textures

Build

  • Snap-to-connect
  • See what connects to what
  • Auto-adjust by joints
  • Build once, repeat many
  • Draw & cut shapes

Precision

  • Easy 3D positioning
  • Make it flush
  • Point & click measuring
  • Scale references

Plan & buy

  • Live parts list
  • Cut plan for stock lengths
  • Fill your cart at retailers

Workspace

  • Works in your browser and on your phone
  • Backdrop reference images
  • Save up to three designs
Start designing for free

Need more? See Crafti Pro