How it connects
The cylindrical eye socket slips over an upright cylindrical pintle pin from above, providing a rotating pivot joint and allowing easy lift-off removal.
Male and female halves
Female socket/eye; slips over a male upright pintle pin, screw hook, or gudgeon.
Usually connects to
Common sizes
- Common bores 3/8, 1/2, 5/8, 3/4 or 1 in (about 9.5–19 mm for the smaller sizes); 5/8 in (15.9 mm) is common in chain-link hardware, with 3/4 in (19.1 mm) heavy variants.
- Strap lengths commonly 6–36 in; mounting may clamp to 1-3/8–2-3/8 in OD pipe or attach to wood/steel.
Where it is used
farm and field gatesbarn doorswooden fence gates; wood fence gatesexterior shuttersheavy utility doorsagricultural hardwarechain link fence gates; chain link fencingornamental steel and iron gates
Variations
- rolled/curled sheet strap eye; rolled sheet steel hinge eye
- weld-on cylindrical barrel
- cast iron pintle strap eye; cast bronze/iron pintle eye
- offset strap hinge eye; bolt-on strap hinge eye
- threaded adjustable eye bolt
- forged iron hinge eye
- clamp-on chain link female hinge
- threaded eye screw / lag eye
How to recognise it
Recognised as an unthreaded tubular sleeve or cylindrical eye formed at the hinge end of a flat metal strap or bracket, oriented vertically to drop over an upright pin.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Standard butt hinge knuckle | Butt hinge knuckles interleave alternating barrels held by a captive or removable central pin, whereas a pintle hinge eye is a single open-ended barrel that drops onto an external stationary pin. |
| Rod end eye / spherical bearing | Rod ends and rigging eye bolts have circular ring eyes intended for fasteners, cables, or spherical bearings, not an unthreaded cylindrical hinge barrel designed for pivot rotation on a pintle. Rod ends contain an articulated spherical ball swivel, whereas a hinge eye is a simple rigid cylindrical bore for planar rotation. |
| Gate hinge male pin (pintle) | The female gate hinge eye is an open cylindrical bore/loop, whereas the male hinge features the projecting vertical pin or pintle. The male half features an upward- or downward-pointing solid cylindrical pin, whereas the female half is the hollow sleeve/loop that receives the pin. |
| Screw hook hinge / gudgeon | Farm gudgeon hinges perform a similar pivot function on wooden or field gates but often use different mounting shank configurations (lag screw or through-bolt) rather than chain link fence frame clamps. |
Also called
pintle hinge eyefemale pintlefemale gate hinge barrelcurled hinge eyehook and eye hinge strapgate hinge eyefemale gudgeonband hinge eye
Good to know
Commonly encountered in traditional 'hook and band' or 'hook and eye / hook and pintle' strap hinge sets for agricultural and architectural gates.
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.


