How it connects
The flexible elastomeric seal with an inverted T-cross-section is fed and slid longitudinally from one open end into the female slotted channel, which mechanically captivates the T-flange against downward pull.
Male and female halves
Female track channel; mates with a male T-end bead on a rubber or vinyl weatherstrip.
Usually connects to
Common sizes
- Track channels typically accept standard 1/4 in (6.35 mm) or 5/16 in (7.94 mm) wide T-end beads; overall track width around 0.5 in (12.7 mm). Lengths match door widths (8 ft to 20 ft).
Where it is used
overhead garage doorscommercial roll-up doorsarchitectural door weatherproofing
Variations
- Double-channel retainer (for U-shaped loop seals)
- Flat mount retainer
- L-shape retainer
- C-channel retainer
How to recognise it
Recognised as an extruded longitudinal groove running the underside of an aluminum or PVC bottom retainer, characterized by a narrow bottom opening slit with wider internal undercut shoulders forming an inverted T-slot cross section.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| P-Bulb Track | P-bulb tracks have a circular teardrop cross-section slot rather than a rectangular T-slot. |
| Bead-End Track | Bead-end tracks take a rounded circular bead (typically 3/16 inch) rather than a flat, wide T-shaped bead. |
Also called
T-end retainer trackT-style retainer channelT-slot seal retainerbottom seal trackT-channel extrusion
Good to know
Retainers frequently incorporate either one single T-track (for bulb seals) or two parallel T-tracks (to hold both edges of a flexible sheet in a U-shape loop seal).
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.


