How it connects
The hinged hasp blade swings over the mounted fixed staple so the staple passes through the slot, exposing the staple loop for padlock insertion.
Male and female halves
Female slot on the hasp strap mating over a male fixed staple loop.
Usually connects to
- Matching fixed/swivel hasp staple or keeper loop
- Compatible padlock shackle
Common sizes
- Match slot length/width, plate thickness and staple clearance. Common slots are about 20–60 mm long × 6–15 mm wide; another range is 1–2 in long × 1/4–1/2 in wide.
- Overall hasp sizes span roughly 1-1/2–10 in (about 50–250 mm for 2–10 in), but overall length does not specify the mating slot.
Where it is used
Door/gate/security hardwareSheds/outbuildingsTool/storage boxes and chestsPadlock closuresLOTO stations
Variations
- Fixed staple
- Rotating/swivel staple
- Safety slot concealing screws
- Corrugated slot
- Angled/double-hinge corner hasp
- Concealed-hinge safety hasp
How to recognise it
An elongated punched through-slot located near the swinging tip of a hinged metal safety hasp leaf.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Swivel staple hasp slot | A swivel staple hasp has a rotating staple mechanism integrated into the latch or mating plate that twists over the slot to hold it closed without a lock. Fixed staple hasps pass over a rigid stationary loop, whereas swivel staple hasps pass over a rotating loop that turns 90 degrees to hold the slot closed without a padlock. |
| swivel hasp slot | A fixed staple hasp slot mates over a stationary staple loop and requires a separate padlock; a swivel staple twists 90 degrees to latch the hasp even without a padlock. |
| padlock eye / shackle hole | A padlock shackle hole is a round hole that directly receives a padlock shackle, whereas a hasp slot is an elongated oblong slot sized to fit over the staple fitting. |
| Padlock eye in the staple | The hasp slot receives the entire projecting staple; the smaller opening in the staple receives the padlock shackle. |
| Swivel-staple hasp | Its keeper rotates; the requested keeper is fixed. Verify keeper construction rather than assuming any slotted hasp is interchangeable. |
Also called
staple clearance slothasp eyelet slothasp leaf openingslotted hasp straphasp-and-staple receiving slothasp strap eye slothasp leaf slotsafety hasp
Good to know
Covers mounting screws of the hinge plate when closed to prevent tampering. Additional standard references: ASTM F883.
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.

