How it connects
Cover plate compresses an elastomeric or closed-cell foam gasket against the flat circular perimeter rim of the box, secured by screws driven into internal tapped mounting bosses.
Male and female halves
Female seating rim and threaded screw holes on the box body mating with a male/neutral cover plate and clamping screws.
Usually connects to
- Matching 4 in square box rim and screw tabs with a blank/industrial cover, mud ring or plaster ring
- Matching two-gang weatherproof box face, rim and mounting holes
- 4 in round weatherproof cover, lampholder cluster cover, flat blank cover or gasket
Common sizes
- Nominal 4 in square box family (101.6 × 101.6 mm); two-gang describes capacity rather than the complete mounting pattern.
- Cover faces may be about 4–4-3/8 in across. Listed screw spacings include about 3-1/2 in and diagonally opposite corners at about 4.6 in, with 8-32 screws.
- Confirm the exact gasket footprint, raised height and hole pattern on the cover and box.
Where it is used
Outdoor/wet-location junction/outlet boxesWeatherproof enclosure closuresSecurity/floodlight fixture mountsSurface switches/receptaclesResidential rough-in and drywall/plaster wall wiringCommercial electrical workFixture-ring mounting
Variations
- Die-cast aluminum weatherproof face
- Polycarbonate/PVC/fiberglass rim with molded screw bosses
- Sheet-metal rim with 8-32 corner tabs
- Two-/four-hole and other gasket/mounting footprints
- Flat metallic/nonmetallic blank cover
- Raised exposed-work cover
- Matching device/plaster ring
How to recognise it
Recognized by a circular box rim approximately 4 inches in diameter with a planar sealing flange and two or four internal screw mounting bosses positioned around the inner perimeter, often accompanied by an elastomeric ring gasket.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| 4-inch octagonal electrical box cover face | Octagonal boxes have 8 flat faceted outer edges and typically 3-1/2 inch mounting screw spacing, whereas round weatherproof boxes have a continuous round perimeter rim with gasket seating. |
| 4-inch square electrical box face | Square electrical boxes have a square 4x4 inch perimeter with corner/edge screw tabs rather than a round cylindrical profile. |
| Electrical plug or receptacle interface | This joint closes the enclosure; it has no electrical contacts or plug insertion geometry. |
| Ordinary indoor two-gang wall plate | A weatherproof closure uses a gasket and a compatible weatherproof box; gang count alone does not establish compatibility. |
| 4-11/16-inch square box cover | A different box-size family; verify the labeled box size and screw pattern rather than relying on a square appearance. |
Also called
4-inch round weatherproof box rim; 4-inch square box rim; 4-inch round electrical box face; 4-inch square electrical box cover mounting surface4 in. round junction box cover interface; round outlet box cover mounttwo-gang weatherproof cover-to-box jointgasketed electrical enclosure cover interface4-inch square exposed-work cover flange4S box plaster ring mounting face1900 box seating rim4-square plaster ring mount; 4-inch square raised device ring mount
Good to know
Covers for weatherproof round boxes typically use #8-32 or #10-32 machine screws spaced across the diameter (commonly ~3-1/2 in. on center) to compress the weatherproofing gasket.
Design with real parts
Crafti checks which parts connect, right in your browser.
