Connection Types Wiki · Fasteners & screw threads

Female Metric Screw Thread

An internal (female) parallel metric machine screw thread conforming to standard 60-degree ISO metric thread geometry, used in tapped holes, standoffs, or threaded inserts where the specific thread pitch (coarse or fine) has not been explicitly measured or verified.

Illustration of a Female Metric Screw Thread
Stands for
ISO = International Organization for Standardization; M = Metric thread designation.
Gender
female
Connects by
threaded, fastened
Standards
ISO 68-1; ISO 261; ISO 262; ISO 965-1 (tolerance, internal 6H); ASME B1.13M; ISO 724 (basic dimensions of ISO metric screw threads)
Regions
worldwide

How it connects

Fastened by threading a male metric machine screw into the internal threaded socket; tightening creates clamping pre-load against mating surfaces.

Male and female halves

Female socket / tapped hole mating with a male threaded fastener or machine screw.

Usually connects to

  • Matching ISO metric male screw, bolt, stud or mounting stem of the correct diameter, pitch, tolerance and handedness
  • Examples: M4 × 0.7, M5 × 0.8, M8 and M12 × 1.75, including M8 eye bolts
  • A 2 mm-pitch connection must also match diameter, such as M14 × 2 or M16 × 2

Common sizes

  • Common machine-screw diameters M1.6–M16, particularly M4/M5/M6/M8. Match diameter and pitch separately.
  • M4 coarse: 0.7 mm pitch, about 3.3 mm tap drill, usual 6H tolerance; rare non-preferred fine-pitch sizes also use 0.7 mm. M4.5 × 0.75 is a separate fine-pitch example.
  • M5 coarse: 0.8 mm pitch and about 4.2 mm tap drill; M8 × 0.8 and M10 × 0.8 are rare fine-pitch alternatives.
  • Other examples include M6 × 1.0 coarse and M12 × 1.75.

Where it is used

Architectural hardwareElectronics/electrical enclosures, panels, covers and standoffsFurniture/castersMechanical/machinery fasteningElectrical terminals/bus bars

Variations

  • Metric coarse thread (standard default, e.g. M6x1.0)
  • Metric fine thread (e.g. M6x0.75)
  • tapped hole in plate; Blind or through tapped hole
  • hex nut
  • standoff
  • M5 x 0.8 tapped hole; left-hand M5 x 0.8 (rare)
  • M5 threaded insert / rivet nut
  • Right-hand or left-hand thread (verify drawing)

How to recognise it

A cylindrical internal hole or standoff featuring parallel, symmetrical 60-degree internal threads sized in millimeter dimensions.

Often confused with

Confused withHow to tell them apart
Unified National Coarse/Fine (UNC/UNF) internal threadUnified threads use imperial sizing (e.g., 1/4"-20) with threads per inch, whereas metric threads measure pitch in millimeters between thread peaks.
Self-tapping screw holeMachine screw threaded sockets have standardized machine-cut or roll-formed 60-degree threads designed for repeated fastener insertion, unlike unthreaded pilot holes for thread-forming screws.
#8-32 UNC#8-32 is 4.17 mm diameter with 0.794 mm pitch (32 TPI); an M4 screw will bind after a few turns. Check with a pitch gauge.
M4x0.5 fineFine pitch 0.5 mm has visibly more, shallower threads; coarse 0.7 is the default when only 'M4' is marked.
#10-32 UNFAbout 4.83 mm diameter with 32 TPI (0.794 mm pitch); nearly identical to M5 x 0.8 but not interchangeable. Needs a thread gauge or the maker's spec to tell apart.

Also called

Female metric threaded hole; ISO metric female screw socketMetric internal thread socket; M12 × 1.75 female threadMetric tapped blind hole / standoffM4x0.7M4 internal thread; M5 coarse thread; M5 internal threadM4 tapped hole; M5 tapped holeM5 x 0.8M5-6H

Good to know

In commercial hardware lacking explicit pitch specifications, ISO metric coarse pitch is standard and implied by default (e.g., M6 implies M6x1.0).

Related connections

Design with real parts

Crafti checks which parts connect, right in your browser.

Start a Project

Crafti Free

Everything you need to start designing.

Parts

  • 22,100+ real parts in 346 categories
  • Configurable parts
  • Real-world textures

Build

  • Snap-to-connect
  • See what connects to what
  • Auto-adjust by joints
  • Build once, repeat many
  • Draw & cut shapes

Precision

  • Easy 3D positioning
  • Make it flush
  • Point & click measuring
  • Scale references

Plan & buy

  • Live parts list
  • Cut plan for stock lengths
  • Fill your cart at retailers

Workspace

  • Works in your browser and on your phone
  • Backdrop reference images
  • Save up to three designs
Start designing for free

Need more? See Crafti Pro