How it connects
Cuts mating internal threads directly into the masonry hole wall via hardened serrated high-low / dual-lead thread flutes upon rotational driving.
Male and female halves
Male screw shank mating into a female pre-drilled masonry pilot hole.
Usually connects to
- Correctly pre-drilled hole in concrete, brick, stone, masonry or CMU (solid, hollow or grout-filled as rated), without a separate insert or nut
Common sizes
- Concrete screw diameters span roughly 3/16–3/4 in (M5–M20); standard Tapcon uses 3/16 and 1/4 in, while Tapcon+ commonly uses 5/16, 3/8 and 1/2 in.
- Heavy-duty Titen HD/Kwik HUS-EZ sizes reach 3/4 in. Lengths span about 1-3/4–15 in (up to 380 mm), with Tapcon+ commonly 2–6+ in.
Where it is used
Residential/commercial concrete/masonry anchoringFraming/sill plates on slabs/foundationsMachinery/fixturesMEP supportsTemporary bracing
Variations
- Hex washer head; Countersunk flat / star head
- Blue Climaseal coated carbon steel; Zinc-plated carbon steel; 410 stainless steel; Bi-metal stainless steel with hardened carbon steel cutting leads
- Simpson Strong-Tie Titen HD
- Hilti HUS / HUS3 / HUS4
- DeWalt Screw-Bolt+ / Snake+
- Tapcon large diameter screw anchors
- Hi-Lo alternating threads (common in light-duty Tapcon style)
- Serrated heavy-duty helical cutting threads (Titen HD, Hilti Kwik HUS-EZ, Powers Wedge-Bolt)
How to recognise it
Recognised by hardened steel construction, distinctive blue Climaseal or zinc coating, serrated/notched cutting threadform along the shank, hex washer head or star drive, and brand markings on the head.
Often confused with
| Confused with | How to tell them apart |
|---|---|
| Standard concrete expansion wedge anchor | Wedge anchors require an expansion clip and torque nut over a stud, whereas Tapcon+ is a one-piece removable screw anchor that cuts internal threads into concrete. Wedge anchors use an unthreaded body with an expanding collar/clip rather than helical threads that undercut concrete directly. |
| Standard Tapcon concrete screw | Standard Tapcon screws are small diameter (3/16" and 1/4"), whereas Tapcon+ refers to ITW's heavy-duty / large-diameter screw anchors (3/8", 1/2"). |
| Standard light-duty masonry screw (e.g. standard Tapcon) | Standard light-duty masonry screws are smaller (3/16 in or 1/4 in) with hi-lo threads, whereas heavy-duty screw anchors have coarser, robust hardened serrated cutting threads designed for structural loads. |
| Wedge anchor thread / standard machine bolt thread | Standard bolts/wedge anchors use standard machine threads (UNC/UNF) intended for a nut, whereas concrete screw threads have hardened, serrated, or high-relief helical cutting teeth designed to cut into stone/concrete. |
| Wood lag screw thread | Wood lag screws feature wide coarse threads with pointed gimlets designed for timber, lacking the hardened case, notched cutting relief, or specialized concrete-cutting profile. |
Also called
Tapcon PlusHeavy-Duty Tapcon+Large Diameter Tapcon+ (LDT+)concrete screw anchor thread; Self-tapping concrete anchor thread; self-tapping concrete screw malemasonry screw threadheavy-duty concrete screw threadHi-Lo concrete threadTiten HD screw anchor; THD screw anchor
Good to know
Tapcon is an ITW (Illinois Tool Works / Red Head / Buildex) brand name for concrete masonry screws. Tapcon+ denotes their code-approved heavy-duty large-diameter screw anchor line. Additional standard references: ASTM E488; ETA (European Technical Assessment).
Related connections
Design with real parts
Crafti checks which parts connect, right in your browser.

